Fire Door Cost Guide: What Should You Really Budget in 2026?

How much does a fire door cost in the UK?

Fire door pricing is unusually opaque: many suppliers advertise a leaf-only price, while the thing that actually earns the fire rating is the complete doorset — leaf, frame, intumescent seals, hinges, closer and other ironmongery, installed to the manufacturer's data sheet. This guide sets out the price ranges published in UK cost guides we have checked directly, with the year and scope of each figure stated, and explains what those headline numbers usually leave out. All figures are indicative market ranges, not quotes from us.

Two widely used 2026 references frame the market. The MyJobQuote fire door cost guide (updated June 2026) lists FD30 doors from as little as £40 for the most basic leaf up to £700+ for styled designs, and FD60 doors from around £130 up to £700-£800. The Fire Risk Assessment Network's guide (accessed July 2026) puts a basic unfinished internal FD30 leaf at £115-£250, oak-veneered or finished FD30 doors at £200-£450, FD60 doors at £250-£650+, and glazed fire doors at £300-£700+.

How much does fire door installation cost?

Labour ranges vary noticeably between published guides, which is itself useful information: the spread reflects how differently 'fitting a fire door' can be scoped. MyJobQuote (June 2026) prices labour at around £40 per hour or £200 per day, with a typical door taking about two hours, and quotes an overall average supply-and-fit cost of around £400 per door. The Fire Risk Assessment Network (2026) is more granular: £150-£400 for a straightforward internal replacement, £300-£700 for a full doorset installation, and £500-£900+ where frame alterations or structural work are needed.

For a compliant result — correct gaps, seals, ironmongery and documentation — the Fire Risk Assessment Network states that most internal FD30 installations land at £300-£600 per door all-in, with higher-specification and entrance doors at £600-£1,200+. Where a quote sits far below these ranges, ask precisely what is included: the cheapest figures generally assume the existing frame is reused, no making-good is required and no certification evidence is supplied. Who does the work matters too — see who can install fire doors for what competence and third-party installer certification look like.

• Frame replacement: around £115-£225 extra where the existing frame is unsuitable (MyJobQuote, June 2026).
• Waste removal: around £15 per old door (MyJobQuote, June 2026).
• Complex openings: frame alterations or structural adjustments push labour to £500-£900+ (Fire Risk Assessment Network, 2026).
• Doorsets vs leaf-and-frame assembly on site: complete fire-rated doorsets generally cost more to buy but simplify compliance, because the whole assembly matches the test evidence.

What do flat entrance doorset programmes cost?

Flat entrance doors are the expensive end of the market. They usually need to be full certificated doorsets — commonly FD30s with smoke seals and a self-closer — and in blocks they are replaced in programmes rather than one at a time. The Fire Risk Assessment Network (2026) lists composite flat entrance doors at £900-£1,500+ supply-only, with higher-specification entrance installations totalling £600-£1,200+ and beyond once installation, ironmongery and making-good are included.

Budget for the ongoing duty as well as the capital cost. In England, under regulation 10 of the Fire Safety (England) Regulations 2022, the responsible person for a multi-occupied residential building over 11 metres must check communal fire doors at least every 3 months, and use best endeavours to check flat entrance doors at least every 12 months. Those recurring checks belong in the maintenance budget alongside the doorsets themselves — our regulation 10 guide covers what each check involves.

How much does a fire door inspection cost?

According to Find a Fire Door Inspector (accessed July 2026), professional fire door inspections typically cost £3-£12 per door for a standard survey, with building-level surveys of standard commercial properties typically running £350-£800. Per-door rates fall as volume rises, and rise where access is difficult or doors need identification work — see how a fire door inspection works and our free inspection checklist.

Set against the prices above, inspection is cheap insurance: a £12 survey that catches a failed closer or a missing smoke seal costs a fraction of replacing a door that has been quietly degrading — and a fraction of the enforcement costs covered below.

What actually drives fire door cost?

Where a verified price range does not exist for your exact situation, it is more honest to understand the drivers than to trust a national average. These are the factors that move quotes most, and they apply whether you are buying one door or three hundred.

• Fire rating: FD60 doorsets use thicker leaves (typically 54mm vs 44mm for FD30), denser cores and heavier ironmongery, so they cost consistently more — see FD30 vs FD60.
• Smoke control: FD30s/FD60s doors add smoke seals and tighter threshold requirements; the seals are cheap, but the fitting tolerances add labour — see intumescent strips and smoke seals.
• Third-party certification: certificated doorsets cost more to buy but come with a data sheet, traceable test evidence and audited manufacture; the Fire Risk Assessment Network lists certification scheme compliance among its five main cost drivers.
• Ironmongery: fire-rated hinges, closers, locks and signage must match the door's test evidence; substituting uncertified hardware to save money can invalidate the rating.
• Glazing: fire-rated glass and glazing systems raise the supply price band substantially (£300-£700+ for glazed doors in 2026 listings).
• Access and building type: occupied buildings, upper floors, out-of-hours working and heritage fabric all add labour time.
• Making good: re-forming reveals, packing and firestopping gaps correctly, redecorating and waste removal sit outside many headline quotes.

Why is the cheapest quote often the most expensive?

The recurring pattern in low quotes is missing evidence. A fire door only performs as tested if the leaf, frame, seals and ironmongery match the manufacturer's test evidence and are installed to its instructions. The British Woodworking Federation notes that third-party certificated suppliers must include a copy of the data sheet with every door — specifying compatible frames, intumescent seals and ironmongery — and that certification schemes audit manufacturers at least annually. Without that evidence, the BWF warns, you cannot be sure the door will perform in a fire.

So when comparing quotes, compare deliverables, not just totals. A compliant quote should identify the doorset and its certification, list the ironmongery, state whether the frame is included, describe gap tolerances and firestopping, and say what documentation you receive at handover. A quote that is £150 cheaper but silent on all of these is not the same product. Under article 17 of the Regulatory Reform (Fire Safety) Order 2005, the responsible person must keep fire doors in an efficient state, in efficient working order and in good repair — an undocumented door makes that duty very hard to evidence. Run your building through our fire door compliance checker to see which duties apply to you.

What does non-compliance cost?

Enforcement outcomes routinely dwarf the cost of the doors themselves. Two London Fire Brigade prosecutions illustrate the scale. In October 2022, the owner of The Bank Hotel was ordered to pay £50,000 — a £40,000 fine plus £10,000 costs — at Southwark Crown Court, with suspended custodial sentences, after failings that included a lack of fire doors, no smoke detectors and no fire alarm system.

In a case reported by London Fire Brigade in December 2021, an Islington landlord was found guilty at City of London Magistrates' Court of six fire safety offences — including fire doors removed on the ground floor and no self-closing door to the kitchen — and ordered to pay £20,385 in fines, costs and surcharge. For context, that sum would have bought compliant supply-and-fit FD30 installations for an entire floor of flats at 2026 prices. Landlords letting shared housing should also read our HMO fire door requirements guide.

These are court-reported outcomes, not hypotheticals, and they exclude the indirect costs that usually follow: remedial works completed under time pressure, higher insurance premiums, void periods and reputational damage. Fire door budgets look different when the alternative is priced in.

A realistic fire door budget

Pulling the sourced ranges together, this is a sensible planning envelope for 2026. Treat every figure as indicative and regionally variable — get itemised quotes for your actual openings, and weight them by the evidence they include, not the total alone.

One honest caveat: published guides disagree, sometimes widely — MyJobQuote's simplest FD30 supply-and-fit averages sit well below the Fire Risk Assessment Network's compliant-installation range. The gap is largely scope: certificated doorsets, matched ironmongery, firestopping and handover documentation all live in the difference. Budget for the compliant version; it is the only one that discharges the legal duty.